Skip to content
mold in a car

Mold Growth In Cars and What To Do

Mold Growth In Cars

mold in a car

(mold growth in car)

Primarily mold is brought on by moist conditions combined with a warm atmosphere, which can happen in your car if you leave a window open or the sunroof open on a wet day, or even if you accidentally drop something on the floor. Mold can colonize in as little as a few days with only a small amount of moisture, but once it’s inside your automobile, it can be very difficult to remove and has the potential to damage the inside. In some circumstances, having it professionally cleaned, which can cost hundreds of dollars, may be the only choice. Additionally, if the mold is totally coated and has gotten into the foam of the seats, for example, it may be so terrible that the automobile interior is a total write-off. However, based on how severe the condition is, there could be certain things you can do on your own to combat the mold.


First, if it’s possible, bring your automobile into full sunlight and open all the windows and doors. You need to dry and air out the car because mold cannot develop in dry environments. To allow the car to air out, you should leave them open for at least 20 minutes. Because mold has a foul stench, and its spores are dangerous to breathe you should purchase a dust mask because you do not want to expose yourself to any mold spores that may still be there even after you have let the car to air out. The next step is to evaluate the damage and determine where and how much mold is present in your car. Examine any area with a porous or absorbent surface, such as the backs and bottom of all the seats.

Examine the seat belts, the carpet and floors, as well as every nook. Check the foam under your seat covers if you can unzip them because mold may have already gotten inside of them. Examine every possible location. Make sure you are also aware of what you are looking for. A range of color for mold can range from white to black, green, or grayish-brown. Typically mold grows in voluminous, elliptical clusters. With a brush, try to remove the huge mold spots, but take care not to distribute the spores any more than you already have. Clean up the loose mold once you’ve broken up the mold clusters. Next, remove as much of the residual mold as you can by scrubbing it off with a bucket of warm water and a PH-neutral shampoo. To keep the interior of the automobile from drying out, make sure there is airflow. Start some fans if there isn’t enough wind.


Now it’s time to bust out the cleaner. Never use bleach or ammonia to destroy mold because they only discolor it and may occasionally kill some surface mold. Even worse, mold can prosper in the presence of ammonia, so you could in fact make the situation worse if you make use of it. Instead, get an enzyme eater. There’re a lot of mold-eating enzyme cleaners you might buy that wear away at the mold at a slight level. These are accessible at the vast majority of hardware stores and could be found at any Walmart for anywhere between $5 and $10. But not every car mold infestation is unique and some may need a different remedy.


Share on facebook
Share on twitter
Share on pinterest
Share on linkedin

We are so delighted to announce some exciting changes with you!

Dry Tech 24/7 Inc is changing gears.

All assessments, trainings, and consults will now be done by the MitChik.

For all of you assessment and restoration needs, please note that you can now reach us at: Maxine@mitchik.com | www.mitchik.com

Maxine has been teaching mold remediation since 2016 and brings her knowledge to you.

Don’t fret, The MitChik can still assist with your restoration projects but the name is now ASAP Restoration.